SB-10 Combined Rice Mill
Working principle
Paddy firstly enters into the machine through vibrating sieve and magnet device, then passes rubber-roller for hulling. After air blowing and air jetting to the milling room, the paddy finishes the process of husking and milling in succession. Then husk, unripe paddy, and white rice are expelled out of the machine respectively. The dust collector collects the fine rice husk
Features:
1. Can remove paddy husk , whitening rice , crush rice husk at one time
2. It is easy to operate with less power consumption and high productivity.
3. with Iron roller that the rice has low breakage
Main Technical specifications:
1.Rice huller
Rubber roller,Ø222×101.6mm(diameter×length)
R.P.M of fast roller 1200(rpm)
R.P.M of slow roller 830(rpm)
R.P.M of hulk blower 1681(rpm)
2.Rice polisher
Iron cylinder,Ø86×278mm (outer diameter of protrudes×length)
Screw conreyor,Ø80×110mm(outer diameter×length)
Hexagonal screen,Ø97×266mm
Mesh of hexagonal screen,0.95×15mm
R.P.M of main shaft of rice polisher 900(rpm)
R.P.M of high pressure blower 3400(rpm)
3.Power requirement 7.5kw 11kw (or 10HP/15HP)
Output
In distribution power 7.5KW
Long-shaped rice 500-550 KG.P.H(standard )
Round-shaped rice 600-650 KG.P.H(standard )
In distribution power 11kw
Long-shaped rice 650-750 KG.P.H (standard )
Round-shaped rice 750-900 KG.P.H(standard )
Overall dimensions of machine 1050×800×1550mm(L×W×H)
Pack: wooden case Size:750*780*1700mm
20` container:21 sets
Weight of machine:195 KG
4. Low temperature when working
